Grill model: 9776-44 Regal 690 LP

5

27249-904 Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY

Note: Part 27249-904 is the factory authorized replacement for the following parts, which are no longer available:

• OMC:22245-901
• OMC:27245-904
• OMC:27246-904

MORE...

18

22005-284 Premium quality heavy duty stainless steel cooking grid SOLD INDIVIDUALLY.

• High quality stainless steel
• 5/16" solid stainless rods
• Sold individually MORE...

20

22005-991 Genuine OEM warming rack. Porcelain enameled, glossy finish.
Temporarily out of stock. Orders for this part will ship late May. MORE...

20A

22003-991 WARMING RACK (SMALLER SIDE) PORCELAIN STEEL MORE...

24

22025-903 A redesigned four burner one piece upper and lower collector box. Replaces 22225-014 and 22225-014A that are no longer available per manufacturer.
Temporarily out of stock. Orders for this part will ship late May.

Note: Part 22025-903 is the factory authorized replacement for the following parts, which are no longer available:

• OMC:22225-014A

MORE...

25

22909-104 Genuine OEM stainless steel Dual-Tube burner. This part has been slightly changed by the manufacturer to include a small bend at the end that does not affect the fit on existing grills that use this part.

Note: The adjustable air shutter on this burner should be set to 1/3 open for LP grills, 2/3 open for natural gas grills. The burner ships with the air shutter set 1/3 open for LP grills.

This burner is the same part as 22909-104NG and 22909-104LP. There is no difference in the parts, 22909-104NG has the air shutter set to 2/3 open for natural gas, 22909-104LP has the air shutter set to 1/3 open for LP.

Note: Part 22909-104 is the factory authorized replacement for the following parts, which are no longer available:

• OMC:20390-S20
• OMC:22909-104LP
• OMC:22909-104NG

MORE...

26

22001-768 Genuine OEM large control knob.

• Off position D-Value: 6 o'clock
• Knob diameter: 2 1/4"
• Socket diameter: 5/16"
• Knob shaft: 1/2" MORE...

26A

22001-668 Genuine OEM small control knob.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 7/8"
• Socket diameter: 5/16"
• Knob shaft: 1/2" MORE...

34A

Y-11230 Cotter pin MORE...

36

10342-T18 Genuine OEM 32" wire for side burner and other applications. Both ends are female spade connector. MORE...

37

20809-957 TUBE-REAR BURNER-COMPR.FITTING -- ASSY MORE...

40

80012 24" LP hose and regulator with QCC-1 connection.

• For use on "new style" QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8" female flare fitting connects to grill. MORE...

?

HR-4B Type 1 LP Regulator with 22" Pressure Hose and 3/8" Female Flare Fitting.FITS: Up to 60,000 BTUs MORE...

43

10342-E13 Genuine OEM electrode with 14" connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
Temporarily out of stock. Orders for this part will ship late May. MORE...

44

10342-247 Genuine OEM electronic push-button 4-spade igniter.

• Uses AAA battery (not included)
• Requires 3/4" mounting hole

Temporarily out of stock. Orders for this part will ship late May.

Note: Part 10342-247 is the factory authorized replacement for the following parts, which are no longer available:

• OMC:10342-248
• OMC:10342-C247

MORE...

44A

10342-244 Electronic push-button 1-spade igniter.

• Uses AAA battery (not included)
• Requires 3/4" mounting hole
• Also replaces part 10342-248
• See part number SBB00047 for ignitor that uses a longer lasting AA battery and requires a 7/8" mounting hole. MORE...

48

22009-901 Genuine OEM Porcelain Grease Pan.
Temporarily out of stock. Orders for this part will ship late May.

Note: Part 22009-901 is the factory authorized replacement for the following parts, which are no longer available:

• OMC:22009-902
• OMC:52009-902

MORE...

51

22209-904 Genuine OEM stainless steel Flav-R-Wave heat plate / Vaporizer. The manufacturer has redesigned this Flav-R-Wave. It is still the functional OEM replacement part, and it is sometimes marketed as part number 18433.

Note: Part 22209-904 is the factory authorized replacement for the following parts, which are no longer available:

• OMC:22209-901

MORE...

56A

26003-34A LID HANDLE RESIN W/REGAL STRAP

Note: Part 26003-34A is the factory authorized replacement for the following parts, which are no longer available:

• OMC:26003-34

MORE...

57

26005-305 HANDLE INSERT-REGAL 440/500 * MORE...

59

10081-BK630 NAMEPLATE HI BROIL KING BLACK ZINC
Temporarily out of stock. Orders for this part will ship late May.

Note: Part 10081-BK630 is the factory authorized replacement for the following parts, which are no longer available:

• OMC:10081-BK603

MORE...

60

10571-6 Genuine OEM Heat indicator. About 2 3/8" wide and 2" high. The threaded stem is about 5 /16" diameter and 1 1/8" long.

Note: Part 10571-6 is the factory authorized replacement for the following parts, which are no longer available:

• OMC:31935-5
• OMC:571-C500

MORE...

70

21475-138 DOOR HANDLE RESIN * MORE...

100

21039-911 CASTER BRACKET 21 3/4" LONG

Note: Part 21039-911 is the factory authorized replacement for the following parts, which are no longer available:

• OMC:21039-915

MORE...

102

10892-23 Rubber castor, 3" w/plate, locking.

Note: Part 10892-23 is the factory authorized replacement for the following parts, which are no longer available:

• 10892-24

MORE...

125

23000-253 Side burner lid IR stainless steel. Sometimes shipped with vinyl peel-off coating; remove before use.

Note: Part 23000-253 is the factory authorized replacement for the following parts, which are no longer available:

• OMC:23000-254

MORE...

146

S21233 Hinge pin clip.

Note: Part S21233 is the factory authorized replacement for the following parts, which are no longer available:

• OMC:S21232

MORE...

147

Y-11231 LID BUMPER MORE...

157

Y-12835 SCREW-PHCP 6-32X1/4 TY-F JS500 MORE...

168

S21362 REAR BURNER SPRING MORE...

174

S21255 Washer MORE...

?

SBB00047 Electronic igniter with one (1) spade connector.

• One AA battery required (not included).
• Requires 7/8 inch mounting hole.
• Will have a silver or a black cap. MORE...